Pups Log

The sizes of characters, props, etc. need to be appropriate for each scene. So I decided to make a "Distant view kayak." The silhouette has been deformed to match the character design. First, draw appropriate lines on the timber and cut it according to the plan. Secure the cut scraps in their original positions with tape. Then cut it on the side view. This will complete the rough shape. Use a plane, cutter, and sandpaper to shape the piece.

  Hi there, I am still working on the scale model Qajaq. Even though it is a scale model, the process is nearly identical to the full-scale Qajaq. Ribs and cockpit hoops are also formed by bending the materials. I boiled the rib material and bent it using a jig to scale. Of course, I made this jig as well. The fact that we have to make the props for the props ourselves is perhaps a big difference from CG animation. Yes, this is truly one of the best parts of making a Stop-motion animation for us. It's not hard to bend these thin pieces of wood, but the problem is that once bent it's difficult to install them onto the gunwales. My fingers seem too thick to move freely between the gunwales. Oh, just to be safe, it is better to chamfer the rib material. The cockpit hoop material is first boiled lightly, then wrapped around the "form". It is fixed with a stapler. Then boiled again and is drying now.  You may be thinking, "This cockpit hoop is too big, isn't it?...

Hi there, As previously mentioned, the main characters of this animation are child kayaker, so of course, kayak appear in the play. He carries it, paddles it, and rolls it too. I am building this scale model of a kayak as close to the actual process as possible. The parts are so small that it's quite difficult to work with. However, I believe that the challenges faced in "craftsmanship" are part of the joy, so I welcome these kinds of challenges. I might make scale models in several scales depending on each scene. Yes, it's relatively easy to arrange the materials and tools required. If you have a short holiday, give it a try. By the way, the tools I prepared are a model saw, a pin vise, wood glue, a needle and thread. I will eventually wrap this frame in fabric. I'm still thinking about the fabric. Usually, when Greenland Kayaks are wrapped in fabric or leather, the beauty of the frame is hidden, but in this animation I want to show the beauty of the frame, so I ...